ZINC BORATE is a highly effective multifunctional flame retardant synergist being used as a flame retardant and smoke suppressant in a wide range of applications. It is an environment friendly flame retardant as it is non toxic in nature and does not generate any toxic/corrosive gases. It is used in plastics, rubber, textile, paint, adhesive, pigments and ceramic industries. Zinc Borate also replaces Antimony Trioxide & Decabromodiphenyl Ether partially (or even completely) in various plastics and rubber applications. Zinc Borate is also known as ZB2335, Borate Flame Retardant, and Fire Break Zinc Borate. TYPICAL CHEMICAL ANALYSIS:- PROPERTIES ANALYSIS ZnO Content 37.5+=1.50% (By Weight) B2O3 Content 48.00+=1.50% (By Weight) TYPICAL PHYSICAL PROPERTIES:- PROPERTIES ANALYSIS Appearance Fine White Powder Specific Gravity 2.70+=0.15% Sieve Residue (at 325 Mesh) Nil Loss on Ignition 14.5+=1.5% (45 Deg C) Moisture Content 0.40% Max Average Particle Size (d50 By Laser Diffraction) 20.-3.0Mic

FAM - 501 Flame Retardant filler FAM-501 is One Pack Flame Retardant & Smoke Suppressant developed for Plasticized PVC applications. It is an Aluminum & Magnesium inorganic complex synergist treated with dispersing aids which results in the superior dispersion, processability and compatibility with the polymer hence imparting superior flame retardant & Smoke Suppressant properties as compared to other traditional synergists, especially in PVC. The synergy of FAM-501 has also been reported along with a high dosage of ATH in FRLS PVC Formulations. TYPICAL SPECIFICATIONS:- PROPERTIES ANALYSIS Appearance White Powder Moisture 0.40% Max (105 deg C) Bulk Density 0.40 - 0.45 gm/cc (Untapped) Specific Gravity 2.38 += 0.02 Sieve Residue Nil (at 325 Mesh) Average Particle 1.50-2.50 Microns Size d50 (By Laser Diffraction)

ALUMINIUM HYDROXIDE is a Super Fine Precipitated Special ATH. Finely Precipitated Special ATH is one of the Largest Consumed Flame Retardants & Smoke suppressants across the World by volumes in various applications. It is an environment-friendly and non-toxic mineral-based flame retardant. Large volumes of finely precipitatedATH are used in plastics and rubber compounding for imparting flame retardancy along with smoke suppression properties making it an effective smoke suppressant and flame retardant. Its extremely uniform, controlled and narrow particle size distribution results .in improved compounding performance, better powder flowability, higher dosage capability, improved extrusion speed, and better thermal stability along with better output and finishing of the end product. TYPICAL CHEMICAL ANALYSIS:- PROPERTIES ANALYSIS A1(OH)3 99.6Max A12O3 64.5%Min FE2O3 0.001Max SiO2 0.001% Na2O 0.09% Max (Soluble) TYPICAL PHYSICAL PROPERTIES:- PROPERTIES ANALYSIS Whiteness 95.00% Min Specific Gravity 2.40+=0.02 Loss On Ignition 34.50% Max (1100 Deg C) Moisture Content 0.40% Max (105 Deg C) Bulk Density 0.40-0.45 gram/cc (Untapped) Sieve Analysis Nil (at 325 Mesh) Average Particle Size 1.7 -2.20 Mic (d50 By Laser Diffraction) Coating Silane/ Stearic acid

CALCIUM BORATE is characterized as an environmentally friendly mineral based Flame Retardant Synergist developed as an alternative to Synthetic Zinc Borate in order to solve the thermal stability problem accompanied by Zinc Borate in plasticized PVC Applications, along with imparting superior Flame Retardant properties comparatively to Zinc Borate. The Flame Retardant action of Calcium Borate is mainly based upon its high Char Forming and Glazing/ Fluxing ability in combination with endothermic decomposition (Heat-Shrink Effect) and along with its inert water content (Loss on Ignition) which is quite higher as compared to traditional Zinc Borate which gives it an edge over it. TYPICAL CHEMICAL ANALYSIS PROPERTIES ANALYSIS CaO Content 32+=1.50% (By Weight) B2O3 Content 44+=1.50% (By Weight) 0.30% Max MgO TYPICAL PHYSICAL PROPERTIES PROPERTIES ANALYSIS Appearance White Powder Sieve Residue 0.10% Max (at 325 Mesh) Loss On Ignition 23.6+=1.50% (450 deg C) Moisture Content 0.40% Max Average Particle Size 2.5-3.5 Mic (By Laser Diffraction)

MOLYBDENUM TRIOXIDE is a high purity free flowing powder and is the most effective Smoke Suppressant used in a variety of applications. Molybdenum Trioxide is used in various formulations in order to achieve reduced smoke levels along with a high level of flame retardancy, especially in rigid and flexible PVC applications. TYPICAL CHEMICAL ANALYSIS:- PROPERTIES ANALYSIS Assay as (Mo03) 99.5% Min Molybdenum (Mo) 66.0% Min Alkalis (Na + K) 0.02% Max Copper (Cu) 0.02% Max Silica (Si) 0.01% Max TYPICAL PHYSICAL PROPERTIES:- PROPERTIES ANALYSIS Specific Gravity 4.70+0.20 Sieve Residue 0.10%Max (at 325 Mesh) Moisture Content 0.40%Max (105 degrees Celsius) Average Particle Size 0.01%Max (d50 By Laser Diffraction)

MAGNESIUM HYDROXIDE is a very finely grounded product having an extremely uniform and narrow particle size distribution. It is considered as a non halogenated, environment friendly and non toxic mineral based flame retardant & smoke suppressant. It is used in various plastics & rubber applications. The initial Decomposition Temperature of Magnesium Hydroxide is 320° C making it suitable for applications where the usage of Aluminium Trihydrate (ATH) has a limitation due to a higher polymer processing temperature of more than l 80°C. Due to its higher Decomposition Temperature than ATH, It is being used as an effective smoke suppressant in conjunction with ATH. TYPICAL CHEMICAL ANALYSIS:- PROPERTIES ANALYSIS Mg (OH2) 93.00% Min MgO 60.0-62.0% CaO 2.00-2.50% SiO2 1.00-1.50% Fe2O3 0.10-0.20% TYPICAL PHYSICAL ANALYSIS:- PROPERTIES ANALYSIS Specific Gravity 2.36+=0.02 Loss On Ignition 31.00%Max Max (1100 Deg C) Moisture Content 0.50% Max (105 Deg C) Coatings Available Silane & Stearic Average Particle Size (d50 By Laser Diffraction

ALUMINIUM TRIHYDRATE (ATH) is a very finely grounded product having a uniform and controlled particle size distribution. Aluminium Trihydrate is the most effective low-cost Flame Retardant filler and is mainly used as a FLAME RETARDANT & SMOKE SUPPRESSANT in various Plastics & Rubber Applications. TYPICAL CHEMICAL ANALYSIS:- PROPERTIES ANALYSIS A1 (OH3) 99.50% Max A12O3 64.50% Min FE2O3 0.01% Max SiO2 0.01% Max Na2O (Total) 0.25% Max TYPICAL PHYSICAL PROPERTIES:- PROPERTIES ANALYSIS Specific Gravity 2.40+=0.02 Loss On Ignition 34.50% Max (1100 Deg C) Moisture Content 0.50% Max (105 Deg C) Coatings Available Silane & Stearic Average Particle Size 2.00-80.00 Mic (d50) (As Per Grade)